Rohde & Schwarz RTP Series - Maintenance

Remote control commands
R&S
®
RTP
1184User Manual 1337.9952.02 ─ 12
MMEMory:AUTonaming:TEXT <NameString>
Defines a text, that can be included in the autonaming pattern.
Parameters:
<NameString> String parameter
MMEMory:AUTonaming:DEFaultpath <Path>
Sets the path where data and settings files will be stored. The factory default path is:
●
"C:\Users\Public\Documents\Rohde-Schwarz\RTx" if no USB flash drive
is connected
●
Drive letter of the USB flash drive, for example, "E:\" or "F:\" if a USB flash
drive is connected.
Parameters:
<Path> String parameter
MMEMory:AUTonaming:RESPath
Resets the path for file operations to the factory default path.
Usage:
Event
MMEMory:AUTonaming:RESall
Resets all autonaming settings to the default value, including the path.
Usage:
Event
22.7.6 Maintenance
22.7.6.1 Self alignment
CALibration:DATE?...................................................................................................... 1184
CALibration:TIME?....................................................................................................... 1185
CALibration:RESult?.....................................................................................................1185
CALibration:DATE?
Returns the date of the last selfalignment.
Return values:
<Date>
Usage: Query only
Asynchronous command
Instrument setup