Network operation and remote control
R&S
®
RTP
1112User Manual 1337.9952.02 ─ 12
Figure 21-2: Overview of the STATus:QUEStionable register
Table 21-3: Bits in the STATus:QUEStionable register
Bit No. Meaning
0 to 2 not used
3
COVerload
This bit is set if a questionable channel overload occurs (see "STATus:QUEStionable:COVer-
load register" on page 1113).
4
TEMPerature
This bit is set if a questionable temperature occurs (see "STATus:QUEStionable:TEMPerature
register" on page 1114).
5
ADCState
The bit is set if the signal is clipped on the upper or lower edge of the screen -overflow of the
ADC occurs (see "STATus:QUEStionable:ADCState register" on page 1114).
Remote control
To Next Page
Loading...
