Rohde & Schwarz RTP Series - Page 1240

Remote control commands
R&S
®
RTP
1240User Manual 1337.9952.02 ─ 12
ZVC:Z<m>:ID:PARTnumber?
Queries the R&S part number of the probe.
Suffix:
<m>
.
1..2
Return values:
<PartNumber>
Usage: Query only
Asynchronous command
ZVC:Z<m>:ID:SRNumber?
Queries the serial number of the probe.
Suffix:
<m>
.
1..2
Return values:
<SerialNo>
Usage: Query only
Asynchronous command
ZVC:Z<m>:ID:SWVersion?
Queries the version of the probe firmware.
Suffix:
<m>
.
1..2
Return values:
<Softwareversion>
Usage: Query only
Asynchronous command
ZVC:Z<m>:I<n>:ZERComp:DETect
Measures the zero offset, the mean value on a currentless DUT. If temperature
changes, or if you change the shunt or other probe settings, repeat the measurement.
Suffix:
<m>
.
1..2
<n> 1..4
Usage: Event
Asynchronous command
Acquisition and setup