Rohde & Schwarz RTP Series - Page 1636

Remote control commands
R&S
®
RTP
1636User Manual 1337.9952.02 ─ 12
BUS<m>:CAN:FDATa:FRAMe<n>:SCValue?
Returns the stuff bit count modulo 8 value.
Suffix:
<m>
.
1..4
<n> *
Return values:
<StuffCount> Range: 0 to 7
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:CAN:FRAMe<n>:BYTE<o>:STATe?
Returns the state of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<State> OK | ERRor | UNDF
UNDF: Undefined
*RST: OK
Usage: Query only
BUS<m>:CAN:FRAMe<n>:BYTE<o>:VALue?
Returns the value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Protocols