Rohde & Schwarz RTP Series - Page 1786

Remote control commands
R&S
®
RTP
1786User Manual 1337.9952.02 ─ 12
BUS<m>:TBTO:RESult:FRAMe<n>:FTYPe?
Returns the type of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<FrameType> IDLE | MAC | OAM | RSFEC | ZEROTSYM | UNKNown
IDLE
IDLE frame. This frame is used for clock synchronization.
MAC
MAC frame. This frame contains information that define how to
go about transmitting and receiving frames.
OAM
Operations, administration, and maintenance frame.
RSFEC
Reed Solomon forward error correction check frame.
ZEROTSYM
Zero terrnary symbol.
UNKNown
No meaningful frame can be determined.
*RST:
MAC
Usage: Query only
BUS<m>:TBTO:RESult:FRAMe<n>:NUMWords?
Returns the number of decoded words for the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<NumWords> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:TBTO:RESult:FRAMe<n>:SRCaddress?
Returns the source address of the selected frame.
Protocols