Rohde & Schwarz RTP Series - Page 1827

Remote control commands
R&S
®
RTP
1827User Manual 1337.9952.02 ─ 12
<n> *
Return values:
<FrameState> OK | SSC | VERSion | PARity | LENGth | BPERR | GAP |
NORESPONSE | INComplete
OK: the sequence is valid.
SSC: SSC error.
VERSion: RFFE version.
PARity: parity error.
LENGth: length error.
BPERR: bus park error.
NORESPONSE: No response.
INComplete: The sequence is not completely contained in the
acquisition. The acquired part of the sequence is valid.
*RST:
OK
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:STARt?
BUS<m>:RFFE:SEQuence<n>:STOP?
Return the start time (SSC) and stop time (BP) of the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Start>, <Stop> Time
Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:RFFE:SEQuence<n>:TYPE?
Returns the type of the selected command sequence.
Suffix:
<m>
.
1..4
<n> *
Return values:
<FrameType> UNDESC | RZWR | RWR | RRD | ERWR | ERRD | ERWL |
ERRL | MASR | MASW | MASOHO | IRSUM | MSKW | MCTR |
MCTW | UNDEF | ERRor
RZWR: Register 0 Write
RWR: Register Write
Protocols