Rohde & Schwarz RTP Series - Page 1896

Remote control commands
R&S
®
RTP
1896User Manual 1337.9952.02 ─ 12
<n> *
Selects the frame.
<o> *
Selects the cell.
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:MPHY:RESult:FRAMe<n>:CELL<o>:STOP?
Returns the stop time for the selected cell.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the cell.
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:MPHY:RESult:FRAMe<n>:CELL<o>:STATe?
Returns the state for the selected cell.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the cell.
Return values:
<State> OK | RSVDERROR | CMDERROR | SYMBOLERROR |
UNKNOWNERROR | INVALID | INCOMPLETE | UNCorrelated |
CRCERROR | VOOR | LENGTHERROR
*RST: OK
Protocols