Rohde & Schwarz RTP Series - Page 1996

Remote control commands
R&S
®
RTP
1996User Manual 1337.9952.02 ─ 12
<n> *
Return values:
<RegAd> Range: 0 to 32
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MDIO:WORD<n>:ST?
Returns the Start Code (= start of frame code) in the present acquisition of the selected
word and the selected serial bus.
Suffix:
<m>
.
1..4
<n> *
Return values:
<StartCode> Range: 0 to 3
Increment: 1
*RST: 0
The parameter value "0" represents Clause 45, and "1" stands
for Clause 22.
The values "2" and "3" do not correspond with any legal parame-
ters according to the standard, but they can be searched for.
Usage: Query only
BUS<m>:MDIO:WORD<n>:STARt?
Returns the start time of the frame in the selected word of the selected serial bus.
Suffix:
<m>
.
1..4
<n> *
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
BUS<m>:MDIO:WORD<n>:STATe?
Returns the state of the frame in the present acquisition of the selected serial bus.
Suffix:
<m>
.
1..4
Protocols