Rohde & Schwarz RTP Series - Page 2038

Remote control commands
R&S
®
RTP
2038User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:USB:WPID <SearchName>,<WithPIDCheck>
SEARch:TRIGger:USB:WPID? <SearchName>
Defines, whether a search for any packet ID error shall be activated or not.
Parameters:
<WithPIDCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WPOR
<SearchName>,<WithPortCheck>
SEARch:TRIGger:USB:WPOR? <SearchName>
Defines, whether a search for any port shall be activated or not.
Parameters:
<WithPortCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WSEU <SearchName>,<WithSEUCheck>
SEARch:TRIGger:USB:WSEU? <SearchName>
Defines, whether a search for any SEU shall be activated or not.
For SEU, see "SEU" on page 818.
Parameters:
<WithSEUCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WSTC <SearchName>,<WithSCCheck>
SEARch:TRIGger:USB:WSTC? <SearchName>
Defines, whether a search for any Start / Complete (SC) shall be activated or not.
Parameters:
<WithSCCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols