Rohde & Schwarz RTP Series - Page 2101

Remote control commands
R&S
®
RTP
2101User Manual 1337.9952.02 ─ 12
Query parameters:
<SearchName>
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:DATA? <SearchName>
Searches for data from the frame with the selected frame number (for the selected
serial bus). This is the hex value of the first four bytes of data fields, prefixed by the
total number of data fields (in square brackets), e.g. [5]FF008041.
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Data>
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:FVAL? <SearchName>
Returns the formatted value of the field with the selected field number within the frame
with the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<ValueFormatted>
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:STATus? <SearchName>
Returns the field status of the field with the selected field number within the frame with
the selected frame number within the search result.
Suffix:
<m>
.
*
Protocols