Rohde & Schwarz RTP Series - Page 2103

Remote control commands
R&S
®
RTP
2103User Manual 1337.9952.02 ─ 12
Return values:
<Stop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:TYPE? <SearchName>
Returns the field name of the field with the selected field number within the frame with
the selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<FieldType>
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:FLD<n>:VAL? <SearchName>
Returns the value of the field with the selected field number within the frame with the
selected frame number within the search result.
Suffix:
<m>
.
*
<n> *
Selects the field number.
Query parameters:
<SearchName>
Return values:
<ByteValue>
Usage: Query only
SEARch:RESult:USBPd:FRAMe<m>:INFO? <SearchName>
Returns specific frame information details of the selected frame in the search result.
This information is also shown in the "Info" column of the decode results table.
Suffix:
<m>
.
*
Protocols