Rohde & Schwarz RTP Series - Page 2158

Remote control commands
R&S
®
RTP
2158User Manual 1337.9952.02 ─ 12
Parameters:
<Format> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:OSET:SKIP <SearchName>,<Format>
SEARch:TRIGger:PCIE:OSET:SKIP? <SearchName>
Enables searching for SKP ordered sets.
Parameters:
<Format> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:OSET:TSONe <SearchName>,<Format>
SEARch:TRIGger:PCIE:OSET:TSONe? <SearchName>
Enables searching for training sequence 1 ordered sets.
Parameters:
<Format> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:OSET:TSTWo <SearchName>,<Format>
SEARch:TRIGger:PCIE:OSET:TSTWo? <SearchName>
Enables searching for training sequence 2 ordered sets.
Parameters:
<Format> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:TLP:ADRT <SearchName>,<AddressType>
SEARch:TRIGger:PCIE:TLP:ADRT? <SearchName>
Sets the address type to be searched for in the transaction layer type.
Parameters:
<AddressType> ANY | X32 | X64
*RST: ANY
Protocols