Rohde & Schwarz RTP Series - Page 2160

Remote control commands
R&S
®
RTP
2160User Manual 1337.9952.02 ─ 12
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:TLP:MERW <SearchName>,<MemRW>
SEARch:TRIGger:PCIE:TLP:MERW? <SearchName>
Sets the read/ write type to be searched for in the transaction layer type.
Parameters:
<MemRW> ANY | READ | WRITE
*RST: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:TLP:MSGC <SearchName>,<TLPMessageCode>
SEARch:TRIGger:PCIE:TLP:MSGC? <SearchName>
Sets the message code to be searched for in the transaction layer type.
Parameters:
<TLPMessageCode> 8-bit pattern, see Chapter 22.4.6, "Bit pattern parameter",
on page 1148. The string parameter accepts the bit value X
(don't care).
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:TLP:MSGR <SearchName>,<MsgRouting>
SEARch:TRIGger:PCIE:TLP:MSGR? <SearchName>
Sets the message routing type to be searched for in the transaction layer type.
Parameters:
<MsgRouting> ANY | ROOTCOMPLEX | ADDRESS | DEVICEID | DEViceid |
BROADCAST | LOCAL | GATHERED
DEVICEID = DEViceid
*RST: ANY
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:PCIE:TLP:ORDE <SearchName>,<Ordering>
SEARch:TRIGger:PCIE:TLP:ORDE? <SearchName>
Sets the ordering type to be searched for in the transaction layer type.
Parameters:
<Ordering> ANY | STRONG | RELAX
*RST: ANY
Protocols