Scanlab RTC6 PCIe Board - Page 756

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
756
innovators for industry
Parameters
(cont’d)
Parameters
(cont’d)
Signal1
(cont’d)
53 Wobbel amplitude
See set_wobbel, set_wobbel_mode and
Chapter 8.4 ”Wobbel Mode”, page 232.
54 ReadAnalogIn
See read_analog_in.
55 Scaled encoder value for x
56 Scaled encoder value for y
57 Scaled encoder value for z
58 RS-232
59 read_mcbsp ( 0 )
60 read_multi_mcbsp ( 0 )
61 read_multi_mcbsp ( 1 )
62 read_multi_mcbsp ( 2 )
Signal2 Like (analogously) Signal1 .
Delayed Short
List Command
set_trigger