Scanlab RTC6 PCIe Board - Page 854

RTC6 boards
Doc. Rev. 1.0.21 en-US
10 RTC6 Commands
854
innovators for industry
Ctrl Command write_da_1
Function See write_da_x.
Call write_da_1( Value )
Parameters Value 12-bit output value for the ANALOG OUT1 analog output port.
As an unsigned 32-bit value.
Higher bits are ignored.
Value = 0 corresponds to an output value of 0 V.
Value = 2
12
–1 corresponds to an output value of 10 V.
RTC4RTC6 Unchanged functionality.
In RTC4 Compatibility Mode: like write_da_x.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References write_da_x
Delayed Short
List Command
write_da_1_list
Function See write_da_x_list.
Call write_da_1_list( Value )
Parameters Value Like write_da_1.
RTC4RTC6 Unchanged functionality.
In RTC4 Compatibility Mode: like write_da_x.
RTC5RTC6 Unchanged functionality.
Version info Available as of DLL 600, OUT 600, RBF 600.
References write_da_x_list