RTC6 boards
Doc. Rev. 1.0.21 en-US
18 Appendix C: The RTC6 EtherBox
938
18.4.2 Compliance with FCC Rules
The RTC6 EtherBox has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference when the
RTC6 EtherBox is operated in a commercial
environment. The RTC6 EtherBox generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with this instruction
manual, may cause harmful interference to radio
communications. Operation of the RTC6 EtherBox in
a residential area is likely to cause harmful
interference in which case the user is required to
correct the interference at his own expense.
18.5 Technical Specifications
– RTC6 EtherBox
Dimensions
See Figure 94.
Weight
1.4 kg
Electrical Specifications
Voltage supply
(a)
(a) Power supply not included.
+12 V…+30 V
Maximum power
consumption, no
peripherals attached
< 12 W
To Next Page
Loading...