DocID024597 Rev 5 1447/1830
RM0351 Serial audio interface (SAI)
1490
43 Serial audio interface (SAI)
43.1 Introduction
The SAI interface (Serial Audio Interface) offers a wide set of audio protocols due to its
flexibility and wide range of configurations. Many stereo or mono audio applications may be
targeted. I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC’97 protocols may
be addressed for example. SPDIF output is offered when the audio block is configured as a
transmitter.
To bring this level of flexibility and reconfigurability, the SAI contains two independent audio
sub-blocks. Each block has it own clock generator and I/O line controller.
The SAI can work in master or slave configuration. The audio sub-blocks can be either
receiver or transmitter and can work synchronously or not (with respect to the other one).
The SAI can be connected with other SAIs to work synchronously.
To Next Page
Loading...
