INTRODUCTION
1-10 Sysmex SF-3000 Operator's Manual -- Revised September 1995
9. DISPLAY SCREEN
9.1 LCD (Liquid Crystal Display) Screen
The LCD screen is divided into 3 parts: the System Status Area, the Data Processing
Area, and the Menu Area.
1. System Status Area
2. Data Processing Area
3. Menu Area
Figure 1-3: Display Screen
1 . System Status Area
The System Status Area appears as the top two lines of the screen (Figure 1-4).
This area displays Main Unit status information such as analysis status, errors, etc.
It also displays data processing status information such as Peripherals, X M, etc.
The [Sysmex] and [Sampler] function keys also appear in this area.
Sysmex
Ready Manual Mode
DP: 1234567890123 XM HC GP DP SU ID
Next No.1234567890123
Sampler
Figure 1-4: System Status Area
• Analysis Status
System status -- "Ready", "Not Ready", etc. is displayed to the left of the top line.
Analysis mode and the next sample ID number --
Analysis mode in which the system is set, and the next sample number to be
analyzed in the selected analysis mode are displayed.
Pressing this keypad displays the Sample No. Setting Screen for the Open
Sampling, Closed Sampling, or Capillary Sampling Manual mode. Using this
setting screen, the analysis mode, next sample ID number for the selected analysis
mode can be set up.
When the Capillary mode is selected, this area is displayed in yellow back-light.
To Next Page
Loading...
