INTRODUCTION, LCD Screen
Sysmex SF-3000 Operator's Manual -- Revised September 1995 1-13
3 . Menu Area
The available menu choices are displayed in the bottom line of the display screen. Touch
the desired keypad on the LCD to access and proceed for the program. In the Main
Screen, the Root Menus appear in this area. Refer to Section 9.2 in this chapter for the
root menus.
NOTE: The program keys masked as shown below do not function when
pressed.
Figure 1-5: Example of Masked Program Keys
4 . Power Saving Function
The LCD contrast will automatically decrease for the LCD power saving if the Main Unit
does not detect any key operation on the LCD for 5 minutes. Touch anywhere on the
LCD to exit the power saving mode.
To Next Page
Loading...
