INTRODUCTION
Sysmex SF-3000 Operator's Manual -- Revised September 1995 1-21
14. SYSTEM SPECIFICATIONS
Table 1-4: System Specifications
Parameters WBC, NEUT%, LYMPH%, MONO%, EO%, BASO%, NEUT#, LYMPH#,
MONO#, EO#, BASO#, RBC, HGB, HCT, MCV, MCH, MCHC, RDW-SD,
RDW-CV, PLT, PDW, MPV, P-LCR
Reagents Diluents : 1 (CELLPACK)
WBC Reagents : 3 (STROMATOLYSER-FD (I),
STROMATOLYSER-FD (II),
STROMATOLYSER-FB)
HGB Reagent : 1 (SULFOLYSER)
Detergents : 1 (CELLCLEAN)
Aperture Diameter RBC, PLT 75 µm
Throughput Approximately 80 samples per hour
(Approx. 85 seconds per sample)
Principles WBC, LYMPH, MONO, NEUT, EO, BASO
: Flow Cytometry with semiconductor laser beam
RBC, PLT : DC Detection Method
HGB : SLS Hemoglobin Method (at wavelength 555 nm)
HCT : Cumulative Pulse Height Detection Method
MCV : Calculated from RBC and HCT
MCH : Calculated from RBC and HGB
MCHC : Calculated from HCT and HGB
Sample Volume Required Sampler Mode : Approx. 270 µL
Closed Mode : Approx. 270 µL
Manual Mode : Approx. 170 µL
Capillary Mode : Over 40 µL
Data Storage Capacity Cell size distribution data (with graphs) : for 1,000 samples
Scattergrams : for 1,000 samples
Order information : for 50 samples
QC files : for 13 QC files
Quality Control
X
Control (or L-J Control) : 180 points x 12 files, 28 parameters
X
M Control : 180 points x 1 file, 28 parameters
To Next Page
Loading...
