SYSMEX SF-3000 - Page 406

TROUBLESHOOTING
Sysmex SF-3000 Operator's Manual -- Revised September 1995 8-85
3.14 Service Data
Use this program to display the latest sample service data in the current display mode,
and to display and reset the counters which indicate the number of operations each unit
has performed.
The Service Data consists of three pages: "P1. WBC", "P2. RBC/PLT" and "P3.
Counters" and can be changed by pressing [←] and [→] keys.
P1. WBC
P2. RBC/PLT
P3. Counters
(1) Press [Mainte.] keypad in the root menu. The maintenance second menu will be
displayed.
NOTE: If the [Mainte.] keypad is not displayed on the LCD, press [More] key
to change the displayed root menu.
Sysmex
Ready
DP:1234567890123
Manual Mode Next No. 1234567890123
Sampler
XM HC GP DP SU
Maintenance
Reagent
Clog
Removal
Drain
Sample
Service
Sequence
Test
Service
Data
More
Return
Figure 8-30: Maintenance Second Menu Screen
(2) Select [Service Data] from the maintenance second menu. The first page screen
WBC data for the latest sample will be displayed.
(3) Use [←] and [→] keys to display "P2. RBC/PLT" or "P3. Counters".
(4) Press [Return] to exit the program.