SYSMEX SF-3000 - Page 603

Sysmex SF-3000 Operator's Manual -- Revised March 1996 ix
Self-Checks 2-4
Semiconductor Laser, Flow Cytometry 10-2
Sensitivity Check, Installation B-33
Sensor Status, Status Display 8-93
Seq. No. Overflow, Troubleshooting 8-47
Sequence Order, Sort, Stored Data 4-43
Serial Interface C-2
Baud Rate C-2
Cable C-2
Character Structure C-2
Communication Format C-2
Input/Output Signals C-2
Software C-4
Service Data 8-85
Set Manual Piercer Cover,
Troubleshooting 8-35
Set Piercer Cover, Troubleshooting 8-25
Set Piercer Lid, Troubleshooting 8-35
Set Reference Data, QC, Target/Limit 6-37
Set X
M Control 6-10
Setting (Entering Reference Values),
Calibration 7-6
Setting Values
Back up to FD 11-57
Print to GP 11-57
Sheath Flow Reagent, Replace Sequence 5-43
Sheath Heater Temp High,
Troubleshooting 8-12
Sheath Heater Temp Low,
Troubleshooting 8-12
Sheath Heater Thermal Sensor Discon.,
Troubleshooting 8-13
Sheath Injector Motor, Test 8-65
Sheath Motor Controller Error,
Troubleshooting 8-44
Sheath Motor Function Error,
Troubleshooting 8-18
Short Sample, Troubleshooting 8-23
Shutdown Procedure 2-49
As Daily Maintenance 5-4
Emergency 1-18
Signal Level, Serial Interface C-3
SLS-Hemoglobin, Principle 10-3
Software, Serial Interface C-4
Sort, Stored Data 4-43
Sample No. Order 4-45
Sequence Order 4-43
Space Requirements 1-20
Specification
Bar Code Label C-17
Reagent 10-39
System 1-21
SRV
Clean 5-21
Location 10-25
Remove Packing Material B-10
Test 8-62
SRV Initial Position Error,
Troubleshooting 8-24
SRV Move Position Error,
Troubleshooting 8-24
SRV Move Too Slow, Troubleshooting 8-24
SRV Tray
Clean 5-7
Install B-11
Start Switch 10-18
Start-Up Procedure 2-3
Start/Stop X
M Control 6-10
Stat Analysis in Auto Mode 2-35
Status Display 8-90
Stop Limits, Set 11-20
Stored Data Capacity 1-21
Stored Data Error, Troubleshooting 8-47
Stored Data Full, Troubleshooting 8-48
Stored Data
Backup FD 4-54
Cancel Output 4-53
Delete 4-58
Graphic Display 4-20
List Display 4-8
Output 4-49
Output, FD 4-54
Search 4-38
Sort 4-43
Stored Data, Display
CBC8 Screen (P2) 4-13
Graphic 4-20
IP Messages Screen (P6) 4-18
List 4-8
RBC/PLT Screen (P5) 4-16
Sample Information Screen (P1) 4-10
WBC+5Diff# Screen (P3) 4-14
WBC+5Diff% Screen (P4) 4-15
SU Indicator 1-12
Subprocessor Errors, Troubleshooting 8-44
Summary of Operation Mode 2-1
Supplementary Parts Information B-5
Supplies and Replacement Parts Listing 5-74
Suspect IP Messages 4-3
SV Status, Status Display 8-93
System Check, Installation B-32
System Options 1-5
System Overview 1-4
System Settings, QC 6-5
System Setup at Installation B-31
System Specification 1-21
System Status Area 1-10