Check instruments lights, cockpit
cabin and switches lights and related
dimmers devices operate correctly.
Check emergency light(courtesy light
for operation (if installed).
Inspect Navigation equipment for
general condition, operation and se-
curity of installation.
Inspect electronic installations for
condition and security: check anten-
nas and mounts for damage and secu-
rity.
Pitot and static system: check static
ports for condition and operation. Ex-
amine Pitot-static system water trap,
drain if required.
Check calibration of airspeed indica-
tor and altimeter. Perform leak test.
Inspect magnetic compass for condi-
tion, operation and security of instal-
lation.
Perform Magnetic compass compen-
sation procedure
Inspect the canopy for damage and
operation. Check latches and hinges
for condition and security of installa-
tion.
Remove all cabin inspection caps. In-
spect flight compartment for absence
of loose equipment that might foul
the controls.
Inspect externally skins, bulkheads,
frames and rivets for damage and
sealing. Inspect drainage holes for
free of obstructions.
To Next Page
Loading...
