TEEJET 5000 OPERATORS MANUAL SLURRY SPREADER, OTHER TYPE (HYDR.)
7.19
Pressing the “NEXT PAGE” key displays the next functions.
+XX%: Step dosage, increase.
-XX%: Step dosage, decrease.
DOSE RATE
NORMAL: Encoding the required application rate
or return to normal after using the step
key.
+XX%: Percentile increase of the encoded application rate. The size of
the steps is altered in encode.
-XX%: Percentile reduction of the encoded application rate. The size of
the steps is altered in encode.
NORMAL: (Only displayed if the step feature has been used)
Normal application rate. Regardless of how many steps the
application rate has been increased/decreased by, pressing this
key will return the application rate to normal.
DOSE RATE: Pressing this key allows the application rate to be altered directly
from the operation screen (see also DOSE RATE in encode).
Pressing the “NEXT PAGE” key displays the next functions.
DISTRIB: RPM of the distributor.
PUMP: RPM of the pump.
FULL
TANK: When the tank is full.
DISTRIBUTOR: The RPM of the distributor is displayed. The number of pulses
per revolution is encoded under REVS. SENSOR in ENCODE.
PUMP: The RPM of the pump is displayed. The number of pulses per
revolution is encoded under REVS. SENSOR in ENCODE.
FULL TANK: Pressing this key transfers the amount encoded under TANK
VOLUME to TON/M3 LEFT (presupposes that the amount has
been encoded). Use this function each time the tank is refilled.
Pressing the “NEXT PAGE” key displays the next functions.
When the ”AUTO/MAN” key is pressed the following is
displayed:
AUTO/MAN: Select between automatic or manual
operation.
+: Increased application.
-: Decreased application.
To Next Page
Loading...