Cisco NCS 2006 User Manual

OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1
Pull the hinge pins on the standard door in the opposite directions (see the figure below).
Figure 57: Installing the Standard Door
Step 2
Align the standard door hinges with the chassis hinges.
Step 3
Release the hinge pins.
Reinstall the door after installing all the other modules.Note
Cisco NCS 2000 Series Hardware Installation Guide
109
Installing the Cisco NCS 2002 Door and Other Modules
NTP-L29 Installing the Standard Door of the NCS 2002 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English