•
#2 Phillips Dynamometric screwdriver
•
Medium slot-head screwdriver
•
Small slot-head screwdriver
•
10 M4 x 6 flat-head Phillips mounting screws
Tools/Equipment
DLP-L62 Unpacking and Verifying the Shelf , on
page 20
DLP-L63 Inspecting the Shelf, on page 22
Prerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
308
Mounting the Brackets on the NCS 2015 Shelf
NTP-L49 Mounting Brackets on NCS 2015 Shelf for ETSI Rack Configuration
To Next Page