42 HEIDENHAIN Technical Manual MANUALplus 620
202601 CfgKinSimpleTrans MP_dir As of NC software 548 328-03, a new
kinematic model is available for the
MANUALplus 620 as an alternative to
the previous kinematic model. The
new kinematic model, which is
provided as a standard feature, makes
it possible to use the PC software
KinematicsDesign to create and
modify kinematics for the control.
For configuration of the new
kinematic model, See "Machine
Kinematics (As of NC Software
548328-03)" on page 727.
202602 MP_val
202603 MP_realtimeComp
202701 CfgKinSimpleAxis MP_dir
202702 MP_axisRef
202801 CfgKinSimple
Model
MP_kinObjects
202901 CfgKinCompos
Model
MP_subKinList
202902 MP_activeSpindle
202904 MP_tiltingAllowed
203001 CfgKinList MP_kinCompositeMode
ls
203701 CfgKinAnchor MP_kindOfAnchor
300112 CfgAxis MP_advancedSettings This machine parameter makes it
possible to configure that the PLC
movement of an individual axis is not
canceled if the touch probe is
deflected; See "Advanced settings for
individual axes" on page 638.
400413 CfgReferencing MP_externRefPulse For referencing a single axis with an
external reference signal, See
"Referencing with external reference
signal" on page 1006.
600418 CfgToolMount MP_kinModelToModify Assign axis mirroring to a tool holder:
See "Axis mirroring on lathes (as of
NC software 548328-03)" on page
746.
600419 MP_kinModel
601807 CfgGlobalPropertie
s
MP_threadHandWheelOn
Activation of the "handwheel in
thread" function: See "Activate
handwheel in the thread" on page
1416.
601808 MP_freezeVconst Activate constant spindle speed for
rapid traverse movements and active
constant surface speed: See "Freeze
spindle speed for rapid traverse" on
page 1392.
604803 CfgGlbDispSettings MP_axesDisplayMode This machine parameter makes it
possible to configure the type of axis
display in the dashboard. You can
choose between actual value,
nominal value, following error or
distance to go; See "Configuring the
OEM window" on page 1293
604901 CfgMMISettings MP_extManualMode Activation of an extended menu
structure in the Machine and Program
Run operating modes: See "Expanded
menu structure" on page 1228.
604902 MP_extProgramMode
MP
number
Config object Parameter Description
To Next Page
Loading...
