January 2012 4.10 List of Machine Parameters 439
CfgPlcTimer
Default values for PLC timers and counters
Changes do not become effective until the PLC program has been restarted.
[Key name of the PLC timer or counter]
run
103503
(optional parameter)
Process marker for the timer or counter
Identifies the timer or counter, for which the
respectively configured time applies.
Timer: T48 to T999
Counter: C48 to C95
If two or more times are configured, the
parameter identifies the first timer or counter.
Format: String
Input: Process marker, max. 80
characters
RUN
LEVEL3
597 110-03
1527
start
103504
(optional parameter)
Start marker for the timer or counter
Identifies the start marker for the timer or counter.
Timer: T0 to T47
Counter: C0 to C47
There is no start marker for timers T96 to T999.
They can be started only through Module 9006.
This parameter is not evaluated by the control.
The PLCdesignNT development environment
uses it for the automatic generation of PLC
definition files.
Format: String
Input: Start marker, max. 80 characters
RUN
LEVEL3
597 110-03
1527
gate
103505
(optional parameter)
Release marker for counters
Identifies the enabling marker (gate marker) for
the corresponding counter.
Gate markers:C96 to C143
This parameter is not evaluated by the control
itself. The PLCdesignNT development
environment uses it for the automatic generation
of PLC definition files.
Format: String
Input: Gate marker, max. 80 characters
RUN
LEVEL3
597 110-03
1528
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page
To Next Page
Loading...
