HEIDENHAIN MANUALPLUS 620 - Page 447

January 2012 4.10 List of Machine Parameters 447
acknowledge
104003
(optional parameter)
Symbolic name or number of the PLC marker
that is set for acknowledging the strobe
No input:
The strobe is reset with the PLC marker entered
in MP_signal.
Format: String
Input: PLC operand, max. 80 characters
RESET
LEVEL3
1562
spindleSpeed
104004
(optional parameter)
Symbolic name or number of the PLC word for
transmitting the spindle speed
Name of the PLC word in which the spindle speed
is transmitted to the PLC.
No input:
The spindle speed cannot be read as a numerical
value.
Format: String
Input: PLC operand, max. 80 characters
RESET
LEVEL3
1563
badSpeed
104005
(optional parameter)
Symbolic name or number of the PLC marker
for impermissible spindle speeds
Name of the PLC marker that is set if the spindle
speed is outside the permissible range.
No input:
The spindle speed is not monitored.
Format: String
Input: PLC operand, max. 80 characters
RESET
LEVEL3
1564
cuttingSpeed
104018
(optional parameter)
Symbolic name or number of the PLC word for
transmitting the constant cutting speed
Name of the PLC word in which the constant
surface speed is transmitted to the PLC.
No input:
The constant surface speed cannot be read as a
numerical value.
Format: String
Input: PLC operand, max. 80 characters
RESET
LEVEL3
1564
Parameter
MP number
iTNC MP number
Function and input Behavior
Access
SW vers.
Page