January 2012 4.10 List of Machine Parameters 543
checkRefDistance
400704
MP2221
(optional parameter)
Monitoring the reference mark of the spindle
speed encoder
Monitoring the datum-datum distance of the
spindle
Input:
on:
Monitor the reference mark of the speed
encoder
off:
No monitoring
Default: off
RUN
LEVEL3
1010
movementThreshold
400705
MP1140
Threshold above which the movement
monitoring functions
Format: Numerical value
Input: 0.0 to 36 000 000.0 [mm/min]
or [°/min]
0: Monitoring switched off
Default: 199.98
RUN
LEVEL3
954
thresholdDistance
400706
(optional parameter)
Tolerance at and above which the following
error is included
Format: Numerical value
Input: 0.0 to 36 000 000.0 [mm] or [°]
Default: 5
RUN
LEVEL3
954
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page
To Next Page
Loading...
