HEIDENHAIN MANUALPLUS 620 - Page 548

548 HEIDENHAIN Technical Manual MANUALplus 620
hscMode
401606
Operating mode of the nominal position value
filter
Format: Selection menu
Input:
 Smoothing:
Mode for finishing operations
 Roughing:
Mode for roughing operations
Default: Smoothing
Allowed in
strobe
LEVEL3
597 110-05
818
manualFilterOrder
401605
Axis-specific order of the mean-value filter for
the Manual operating modes.
Overwrites the value in CfgFilter/
defaultManualOrder.
Only odd integral input values are permitted. If
you enter an even number, the MANUALplus 620
displays an error message.
Format: Numerical value
Input: 1 to 251
Default:11
Allowed in
strobe
LEVEL3
818
handwheelFiltOrder
401608
(optional parameter)
Axis-specific order of the mean-value filter in
the El. Handwheel operating mode
Overwrites the value in MP_manualFilterOrder
or CfgFilter/defaultManualOrder.
Only odd integral input values are permitted. If
you enter an even number, the MANUALplus 620
displays an error message.
Format: Numerical value
Input: 1 to 251
Default:11
Allowed in
strobe
LEVEL3
597 110-05
819
Parameter
MP number
iTNC MP number
Function and input Reaction/
Access
Page