NOTE: It is recommended to use the supplies provided with the printhead kit. Before starting this process
make sure the inserted print cartridges contain enough ink. In case there is not enough ink, the printer will
request new cartridges. See Replace an ink cartridge on page 122.
1. Make sure the printer is turned on.
2. Make sure the printer wheels are locked (the brake lever is pressed down) to prevent the printer from
moving.
3. From the front panel, go to the dashboard status, touch , scroll to Printer maintenance and select the
Replace Printhead option. Follow the instructions on the control panel.
4. When requested on the front panel, open the printhead door on the right hand side of the printer.
5. Locate the tubes connector lever (blue) to release the ink tubes.
ENWW Ink-supplies troubleshooting 125
To Next Page
Loading...
