HP DesignJet T730

Introduction
●
The list of parts in this chapter include the notation CSR A or CSR B for parts that can be replaced by the
customer. All other parts must be replaced by an engineer. See Customer Self Repair parts on page 256.
●
For information on part replacement visit HP Customer Self Repair Services Media Library - Media
Selection, ("Printers and Multifunction > HP DesignJet Printers), at: http://h20464.www2.hp.com/
index.html
●
Part Numbers of SV kits are subject to change. Please double check in the HP Part Surfer for the latest
version or elevate to the next support level for advice.
●
For information on the preventive maintenance kits, see Preventive maintenance kits on page 537.
●
Unless otherwise indicated, service parts are compatible with all SKUs. If there is any limitation, it is
indicated in the tables below as follows:
◦
SFP: compatible with the HP DesignJet T730 Printer
◦
MFP: compatible with the HP DesignJet T830 MFP
For further info:
228 Chapter 4 Parts and diagrams ENWW