FAQ: Tips & Tricks
●
1. Image Quality
●
2. Scan and Copy
●
3. Hardware
●
4. Firmware
●
5. Software and Drivers
●
6. Network
1. Image Quality
Banding when printing area lls on Plain paper in normal mode
Question: When printing on Plain Paper media in Normal print mode, I get horizontal banding in area lls.
Answer: This a common issue known of T730/T830 and T120/T520 printers. For the T730/T830 there will be
a specic print mode called “Plain Paper for Graphics” in FW VR3 (ETD: Jun’16) that will x this issue. For the
time being, we can recommend that the customer set the paper as “coated” in the Front Panel. This will
improve IQ.
2. Scan and Copy
Dierences between Scan&Print and Copy
Question: Color performance behavior of the unit when you “scan and print” diers from when you “copy.”
Answer:
a. In the “Copy” ow the priority is to create a copy that most closely resembles the original.
b. In the “Scan & Print” ow, the printing color map is optimized for printing (from applications). The “scan”
ow is optimized for display in monitors. The combination of both ows show “less vivid” print-outs.
One workaround to get better output is to use ICC proles. Adobe applications (and some non-Adobe
applications) support ICC proles without any issues.
TIFF scanning has some limitations
Question: I cannot print a TIFF le generated in a scan of the unit (T830MFP).
Answer: This is a temporary product limitation that will be solved in the next rmware release (VR2.1)
scheduled at the end of Mar’16.
Question: I cannot open a TIFF le generated in a scan of the unit (T830MFP) with the Adobe Photoshop
application.
Answer: This is a temporary product limitation that will be solved with the next rmware release (VR2.1)
scheduled for the end of Mar’16
Question: When working with a TIFF le generated in a scan of the unit (T830MFP), I have lost image
accuracy.
596 Chapter 8 Appendices ENWW
To Next Page
Loading...
