2.10 RTC Battery expired
Use this option to reset the RTC battery ag after replacing the RTC battery.
3. System Conguration
3.2 Set Wireless Region
This option can be used to change the Wireless region.
1. From the Extended Support Menu, select 3.2 Set Wireless Region and then OK.
2. The following screen is displayed:
3. Press OK.
4. Use the left and right arrows to change the wireless region.
CAUTION: Changing the wireless region has legal implications. If you change the region, be sure you
are using the correct wireless region for the country in which the printer is installed.
The options available are the following:
●
World Safe: It can be used worldwide, and is the default region in the printer. If you are not sure which
region to use, please congure the printer with the World Safe region.
◦
Settings: 2.4 Ghz; Maximum Power EIRP = 20 dBm; Channels = 1 to 11
●
World: This region can be used worldwide except in the following countries: USA, Canada, and Taiwan.
◦
Settings: 2.4 Ghz; Maximum Power EIRP = 20 dBm; Channels = 1 to 13
●
US: This region can be used only in the USA, Canada, or Taiwan. Do not use this wireless region in any
other country.
ENWW Extended Support menu 217
To Next Page
Loading...
