HP DesignJet T730

Specic error codes for startup and opto trip failures
System Error Code (DAXX-
YYZZ)
Service Part (XX.YY) Error Cause (YY) Color Coding (ZZ)
0024-0000 24. IDS startup No ink ow to PHA
See the Color Coding table ate
the end of How to interpret
error codes for startup and
opto trip failures on page 75
0024-1000 24. IDS startup Out of ink ,faulty or missing
cartridge
0024-1100 24. IDS startup Out of ink detected in altered
supplies
0026-0100 26. ISS Sensor malfunction
How to interpret error codes for startup and opto trip failures
Error codes use the “two groups” error code format DAXX-YYZZ., but with slightly dierent coding to include
the information of the color that is failing. The elds are briey described in the table below:
Field Description
D Device Type: 1-digit number from 0 to 9.
A Action: 1-digit number from 0 to 9.
XX Printer function that is failing: 24 (startup) /26 (opto trip failure).
YY Error Cause: 2-digit numbers from 00 to 99.
ZZ Color Coding: See table below.
See below example as reference:
Key Example: 0041-0017
D: Device Type 0: Printer
A: Actions 0: Replace
XX-YY: Module – Service Part 41-00: Paper motor
ZZ: Error Causes 17: Movement blocked
Color Coding
00
Colors failing not encoded
01 Y failing
02 M failing
03 MY failing
04 C failing
05 CY failing
ENWW System error codes 75