Copies of most of the iers can be found in the appendices to this manual: see CSR iers on page 567.
For further information
●
CSR Corporate Standards: http://standards.corp.hp.com/smc/hpstd/AHP0001501.htm
●
CSR Web site: http://www.hp.com/go/csrparts/
●
HP Parts Page: http://partsurfer.hp.com/
●
HP Parts Store: http://www.hp.com/go/hpparts
Videos available
The following videos are available in the HP Services Media Library:
●
Public, available to customers: Ink Cartridge Cover, Out-Of-Paper Sensor, Output Tray, Output Tray
Sensor.
●
For service technicians only: Carriage, Carriage Motor, Central Cover, Cutter, Front Panel, Main PCA,
Output Platen, Pinchwheels, Starwheels and Output Shaft, Trailing Cable.
HP Services Media Library
●
HP intranet access: http://thesml.hp.com/
●
HP external/Customer Self Repair: http://www.hp.com/go/sml
●
HP Partner via regional Partner portal: http://www.hp.com/go/psml
Recommended checks after replacing parts
After replacing a part, we recommending checking the status of the printer as follows:
1. Turn on the printer and check that there is no system error.
2. Print the print-quality diagnostic report on an A4 or US Letter sheet of paper and check that there are no
problems.
3. Load a roll of paper and perform some form feeds and cuts.
For some parts, further actions are required:
●
After replacing the Main PCA, check for rmware updates and set up Web Services.
●
After replacing the Service Station or Carriage Assembly, perform the appropriate preventive
maintenance reset. See Extended Support menu on page 216.
ENWW Videos available 257
To Next Page
Loading...
