HP DesignJet T730

●
Use another App to print these jobs.
●
Select the “print job as bitmap” option.
●
In the future there will be a PCL driver to simplify processing.
Jobs rotated unexpectedly
Question: Jobs are rotated, although they still t on the roll that is loaded.
Answer: Some rolls can have dierent width measures. The printer uses the Line sensor to measure the roll
and provides you with the width of the roll. If the roll is a non-standard width, the printer will measure the
exact width (e.g. 35.90” instead of 36”). So if you send a 36” x 24” job, it doesn’t
t onto the 35.90” roll and it
will be rotated. In order to avoid this issue you can use paper with a valid width and/or uncheck the
“autorotate” feature.
Windows Photo Viewer printing issues
Question: Printing issues like blank printouts and missing objects when printing from Windows Photo Viewer.
Answer:
1. There is no preview for print settings. This issue is due to the Windows Photo Viewer app when selecting
some page sizes. Jobs are printed with good quality.
2. When printing specic resized les (e.g. 150% of the actual size) a blank area is shown in the middle of
the printout. The troubleshooting recommendation is to use another app to print these jobs.
Recommended maximum printing length
Question: What is the recommended max plot length for printing?
Answer: he maximum plot length is dened by the driver.
●
HP-GL/2 (included in installer) driver: 91 meters.
●
HP DesignJet Raster driver for Windows Modern Apps: 3.2 meters.
●
Mac HP DesignJet Raster Driver: 91 meters.
Multiple copy selection does not work in AutoCAD 2013
Question: When selecting multiple copies in AutoCAD 2013, the printer only prints one job.
Answer: This is an AutoCAD issue. The “copies” setting is not synchronized with the HP driver and thus
“copies” information is not sent to the printer. In order to select several copies, you must select the number of
copies in the driver interface, not in the app interface.
Issues printing from Windows Class Driver
Question: Several issues may appear when printing from Windows Class Driver.
Answer: The Windows Class Driver is an old driver, existing previously to the T730/T830 release, so the
performance of this driver is not optimized for this printer. It is not recommended to use this driver; you must
install the latest driver version available on the HP website.
606 Chapter 8 Appendices ENWW