2. Select Change.
3. Here, slide down the top menu and press Info.
4. Press HP Designjet T730/T830 (printer name) and the printer will go back to screen 2.
5. This time select Done.
6. Click on the Home icon
7. Enter the Extended Diagnostic Menu. Press HOME + BACK + HOME + HOME.
8. Go to the Reset menu and perform an OOBE reset.
File format supported printing from USB
Question: What are the le formats supported to print from UBS host?
Answer: Formats supported are: TIFF, JPEG and HP-GL/2.
●
In rmware version 1548A and previous when trying to print wrong formats les, a bluescreen may
appears. Reboot the unit and instruct the Customer not to print unsupported les.
●
In the next rmware version VR2.1 the wrong le formats will not be shown on the Touch Panel.
5. Software and Drivers
Vectorworks11: Collate function
Question: Vectorworks 2011 has an issue with the collate function as it works in the opposite way it was
intended with any vendor driver (not only Candela, but all HP drivers, OCE and Canon drivers).
604 Chapter 8 Appendices ENWW