c. Double-click Services and Applications, then click Services.
d. Scroll down the list of services, right-click HP Network Devices Support, then click Restart.
e. After the service restarts, try using the printer over the network again.
If you still cannot use the printer over the network, or if you have periodic problems in doing so, the
rewall may be interfering, or there may be a problem with the network conguration or router. Contact
the person who set up the network or the router manufacturer for help.
If you are able to use the printer over the network, the network setup was successful.
548 Chapter 8 Appendices ENWW
To Next Page
Loading...
