3 CALCulate Subsystem
186 Keysight N8262A Programming Guide
CALCulate Subsystem
The CALCulate subsystem performs post acquisition data processing. Functions in
the SENSe subsystem are related to data acquisition, while the CALCulate
subsystem operates on the data acquired by a SENSe function.
There are four independent CALCulate blocks in the power meter: two for each
window, as shown in Figure 3-1. The numeric suffix of the CALCulate command
determines which CALCulate block is used and where the measurement result is
displayed.
Figure 3-1 Measurement display CALCulate block window
Data from both SENSe blocks may feed any or all of the CALCulate blocks via the
MATH command. Figure 3-1 details where the commands are applied with in the
CALCulate block.
upper window/upper measurement
CALC1
upper window/lower measurement
CALC3
lower window/upper measurement
CALC2
lower window/lower measurement
CALC4
To Next Page
Loading...
Need help?
General
