Keysight Technologies P Series

16 SERVice Subsystem
626 Keysight N8262A Programming Guide
SERVice:BIST:TRIGger:TEST?
This command queries trigger in and out.
– 1 is returned if the test passes
– 0 is returned if the test fails
Syntax
Example
NOTE
Before running this command, the front panel trigger out must be jumpered to
the front panel trigger in.
SERV:BIST:TRIG:TEST? This command queries trigger in and out.
:BIST
SERV
:TRIG
:TEST
?