Keysight Technologies P Series User Manual

MEMory Subsystem 7
Keysight N8262A Programming Guide 303
Query Example
Error Messages
– If the register number is out of range, error –222, “Data out of range” occurs.
– If the name is invalid, error –224, “Illegal parameter value” occurs.
– If a register or sensor calibration table with the same name already exists, error
–257, “File name error” occurs (command only).
MEM:STAT:DEF? "SETUP1" This command queries the register number
of SETUP1.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English