Keysight Technologies P Series

SERVice Subsystem 16
Keysight N8262A Programming Guide 631
SERVice:SENSor[1]|2:CDATe?
This query returns the calibration date in E-Series sensors. Calibration date
information is stored in the sensor’s EEPROM.
Syntax
Example
Error Messages
– If no power sensor is connected, error –241 “Hardware missing” occurs.
– If a a sensor other than a P-Series or E-Series power sensor is connected, error
–241 “Hardware missing” occurs.
SERV:SENS2:CDATe? This query returns the calibration date of the
E-Series sensor connected to Channel B.
SERV
1
2
:CDAT
?
:SENS