6 FORMat Subsystem
276 Keysight N8262A Programming Guide
FORMat Subsystem
The FORMat subsystem sets a data format for transferring numeric information.
This data format is used only for response data by commands that are affected by
the FORMat subsystem.
The queries affected are:
– FETCh?
– READ?
– MEASure?
The same FORMat is used on both channels.
Keyword Parameter Form Notes Page
FORMat
[:READings]
:BORDer <character_data> page 277
[:DATA] <character_data> page 279
To Next Page
Loading...
