Keysight Technologies P Series User Manual

SYSTem Subsystem 12
Keysight N8262A Programming Guide 475
Example
Error messages
– If a non-E-Series power sensor is connected, the command can be used to set
the power meter to Default settings. Attempts to set the power meter to any of
the other settings result in error –241 “Hardware missing” occurring.
SYST:PRES DEF This command presets the power meter with
default values. The same default values are
set when the parameter is omitted.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English