Keysight Technologies P Series - Format[:Readings]:Border <Character_Data

FORMat Subsystem 6
Keysight N8262A Programming Guide 277
FORMat[:READings]:BORDer <character_data>
This command controls whether the binary data is transferred in normal or
swapped Byte ORDer. It is only used when FORMat[:READings][:DATA] is set to
REAL.
Syntax
Parameters
Example
Reset Condition
On reset, this value is set to NORMal.
FORM
:READ :BORD
Space
?
character_data
Item Description/Default Range of Values
character_data Byte order of binary data transfer:
– NORMal
– SWAPped
NORMal
SWAPped
FORM:BORD SWAP This command sets the byte order to
swapped.