Keysight Technologies P Series

13 TRACe Subsystem
546 Keysight N8262A Programming Guide
TRACe[1]|2:MEASurement:INSTant:REFerence? <numeric_value>
This command returns the time instant at which the power waveform intersects
the reference level supplied as the command parameter. This allows the time
instant used to calculate the pulse parameters to be found. It also allows
calculation of transition between non-standard reference levels.
Syntax
Parameters
NOTE
This command is only applicable when P-Series power sensors are used with
single or continuous triggered acquisition is selected.
1
2
:MEAS
TRAC
:INST
:REF
?
Space
numeric_value
Item Description/Default Range of Values
numeric_value Reference level in percentage
–25 to 125