Keysight Technologies P Series

13 TRACe Subsystem
562 Keysight N8262A Programming Guide
TRACe[1]|2:UNIT <character_data>
This command sets the units for the trace for the specified channel
Syntax
Parameters
Example
NOTE
This command is included for compatibility purposes only. It has the same
purpose as [SENSe[1]]|SENSe2:TRACe:UNIT <character_data>, which should
be the preferred command.
TRAC
:UNIT
Space
character_data
?
1
2
Item Description/Default Range of Values
character_data – DBM: dBm
–W: Watts
DBM
W
TRAC2:UNIT W This command sets the trace units for
Channel B Watts.