Keysight Technologies P Series User Manual

9 PSTatistic Subsystem
330 Keysight N8262A Programming Guide
Error Messages
– If no power sensor is connected, error –241 "Hardware missing" occurs.
– If sensor/s connected are not P-Series sensors, error –241 "Hardware missing"
occurs.
– If measurement speed setting is FAST, error –221 "Settings conflict" occurs.
– If the acquisition mode is in continuous triggering or triggering source is set to
either INT1, INTl2, or EXT, error –221 "Settings conflict" occurs.

Keysight Technologies P Series Specifications

General

Brand	Keysight Technologies
Model	P Series
Category	Measuring Instruments
Language	English